SEPAMAT system separator
The INTEWA SEPAMAT® system separators separate the drinking water system from the consumer system. They protect the drinking water from contamination caused by the backflow of substances from the consumer side. A system separator is installed between the municipal drinking water pipe and one or more consumers, which must be separated according to category 5 in accordance with the current drinking water regulation DIN EN 1717.
Connection-safe
The "free outlet" is already integrated in the DVGW-certified RAINMASTER. According to the European standard EN1717, only the so-called "free outlet AA and AB" is permitted for the replenishment with drinking water in case of water shortage. The RAINMASTER thus fulfils the highest safety requirements worldwide.
Quiet operation
A multistage centrifugal pump causes a noise level of about 65 dB(A). The RAINMASTER Eco 10, on the other hand, is very quiet at about 50 to 56 dB(A). RAINMASTER Favorit -SC pumps are equipped with a speed control. Since these usually run at a significantly lower speed during practical operation, when only a few consumers require water, they also cause significantly lower noise emissions during this time. A RAINMASTER Favorit SC then only causes approx. 45 dBA when filling a WC.
SEPAMAT Eco
The DVGW-certified, fully automatic and ready-to-connect system separation station fulfils the separation of category 5 drinking water and liquids in accordance with DIN EN 1717. It protects the drinking water from contamination caused by the backflow of substances from the consumer side. The integrated pump delivers the water from a separation storage tank to the consumers as required. The water level in the separator tank is regulated by a float valve. The drinking water network and an emergency overflow are connected to the separator tank.
- flow rate up to 600 l/h
- 100 watt energy-saving design
- ready for connection and compact
- incl. pressure connection set, pressure gauge, expansion vessel and bleed tap
- very quiet with only 50 - 56 dbA
- Certifications: DVGW, BELGAQUA, SVGW, KIWA
SEPAMAT Favorit 41-SC-A
The low-cost SEPAMAT® system separation station type SC-A is already equipped with the highly efficient permanent magnet motor and inverter technology. The pump capacity is ideal for smaller requirements.
- max. 3.2 bar and 4.5 m³/h
- System separation station according to DIN EN 1717, category 5
- Certifications: DVGW, BELGAQUA, SVGW, KIWA
- with NUVOS® inverter pump
- maintenance-free & durable
- high-quality stainless steel design
- regular priming
SEPAMAT Favorit 45 and 70-SC
These very powerful SEPAMAT SC system separation stations are equipped with a highly efficient permanent magnet motor and inverter technology. The pump capacity is suitable for medium to large objects. The devices can also be operated in parallel as double pump systems in the DUPLEX application.
- SM-F55-SC: Max. 4.5 bar and 5.5 m³/h
- SM-F72-SC: Max. 4.8 bar and 7.0 m³/h
- system separation station according to DIN EN 1717, category 5
- Certifications: DVGW, BELGAQUA, SVGW, KIWA
- with NUVOS®
- maintenance-free & durable
- high-quality stainless steel design
- self-priming
- redundant multi-pump operation possible as a DUPLEX system
SEPAMAT Favorit 45 and 70-SC Duplex
The speed-controlled SEPAMAT® SC Duplex system separating stations with a redundant design are used for large properties where maximum supply reliability and convenience are required. Two SEPAMAT SCs can be operated in parallel as a multi-pump system.
The SEPAMATs are simply connected to each other via a data cable. This allows them to communicate with each other. The ingenious thing about this is that although the individual SEPAMAT SC units work together via the control system, they are each completely self-sufficient. Conventional multi-pump systems only have one control unit and drinking water supply. In the event of a failure, the entire building can no longer be supplied with process water. In contrast, each SEPAMAT SC has its own control unit and its own drinking water back-up supply. Should one system fail, the remaining systems continue to operate independently - a superior system!
PROFI system separation stations
The fully automatic and ready-to-connect PROFI drinking water separation station fulfils the separation of category 5 drinking water and liquids in accordance with DIN EN 1717.
The pressure booster system consists of two centrifugal pumps with electronic frequency converters, which enable constant pressure regulation of both booster pumps and thus guarantee a constant operating pressure.
The system has a flushing device to prevent stagnation of the drinking water in the drinking water pipe. It is suitable for commercial applications.
